Cisco IEシリーズスイッチ Cisco Systems October 20th, 2016.

Presentation on theme: "Cisco IEシリーズスイッチ Cisco Systems October 20th, 2016."— Presentation transcript:

1 Cisco IEシリーズスイッチ Cisco Systems October 20th, 2016

2 Cisco IE Switches Product Overview
アグリゲーション アクセス 2016年8月 提供開始！ IE5000 IE4000 IE4010 Designed for all industries Layer 2 or 3 (IP services) 4 x 10GE* or 4 x GE uplinks 24 GE downlinks IEEE1588 PTP (default and power profile) Layer 2 NAT Up to 12 PoE/PoE+ Dying gasp Cisco TrustSec SGT/SGACL MAC Sec FNF HW-ready Time-Sensitive Network (TSN) ready Stacking* Conformal Coating* IOx ready Timing Interfaces (IRIG-B, GPS, TOD) IE3000 IE CGS2520 2016年8月 提供開始！ IE2000 IE2000U 機能 Designed for all industries Layer 2 or 3 (IP services) 4 GE uplinks Up to 20 total GE ports IEEE1588 PTP (default and power profile) Layer 2 NAT Up to 8 PoE/PoE+ Dying gasp Cisco® TrustSec® SGT/SGACL MAC Sec Time-Sensitive Network (TSN) ready IOx MRP IE1000 For all industries Layer 2 or 3 (IP services) 4 GE uplinks 28 total GE ports IEEE1588 PTP (default and power profile) Layer 2 NAT Up to 12 or 24 PoE/PoE+ Dying gasp Cisco TrustSec® HW-ready MAC Sec HW-read Time-Sensitive Network (TSN) ready IOx ready L2 or L3 (IP services) 1 RU 2 GE uplink ports 24 FE downlink ports 8 PoE/PoE+ and 16 SFP or 24 copper models IEEE1588 PTP (default and power profile on CGS2520) Layer 2 Small form factor IP30, IP67 DLR (only Stratix) MRP Layer 2 NAT IEEE1588 PTP (default profile) Up to 4 PoE/PoE+ CC* L2 or L3 (IP services) Modular Up to 26 ports IEEE1588 PTP (default profile) PoE/PoE+ Lightly managed Layer 2 only 30 sec boot up time Web config tool UP to 8 PoE/PoE+ Layer 2 or 3 (IP Services) Small form factor PRP IEEE1588 PTP (default or power profile) Up to 4 PoE/PoE+ 10/100M 1G 1/10G

3 Cisco IE1000 シリーズの特徴 い Express Setup / Web GUIから簡単セットアップ ライト・マネージドスイッチ
STP、VLAN、トラブルシューティング、リモートアクセス等の機能をサポート PoEをサポート Say hello to the Cisco Industrial Ethernet (IE) 4010 Series switches. They are today’s most flexible, scalable, and future-proof industrial Ethernet Access switches. These best-in-class switches provide all of the performance, manageability, and powerful security features of the IE2000, IE3000 Series, and IE-4000 including built-in Cisco intelligence, increased Power over Ethernet (PoE) support, and compliance with dozens of safety certifications and industry standards. Cisco’s unified communication solution—industrial Ethernet and Wi-Fi working together—can connect access points; provide voice, video, and data; and deliver rich business intelligence to connect plant floor operations with the enterprise using the Internet. The IE4010 Series has been specifically designed for industrial Ethernet applications, including factory automation, energy and process control, intelligent transportation systems (ITSs), city surveillance programs, mining, and oil & gas, as well as IT deployment where hardened products are required.

4 4×10/100 (RJ45 w/POE) 8×10/100 (RJ45 w/POE)
Cisco IE1000 製品概要 型番 IE1000 IE1000（PoEモデル） ポート構成 4×10/100 （RJ45） 6×10/100　（RJ45） 4×10/100 (RJ45 w/POE) 8×10/100 (RJ45 w/POE) アップリンクポート (5port) 1×10/100 （RJ45） (8port) 2 10/100 （RJ45） 2 GigE Fiber (copper and Fiber SFP) PoE - PoE/PoE+ ポート 5 / 8　ポート 6 / 10　ポート 電源 平均24 VDC (9 – 36) 平均48/54 VDC (44 – 57) サイズ (cm) (5port) W3.81 x H12.7 x D11.5 (8port) W4.5 x H12.7 x D11.5 W4.5 x H12.7 x D13.3 アラーム 入力/出力 No Yes 動作温度範囲 -20-60℃ -40-70℃ IP規格（防水・防塵保護） IP30 ワランティ 5年

5 Cisco IE1000 機能概要 IE1000の主なサポート機能 IE1000 vs. IE2000の機能比較 IGMP
LLDP (including LLDP-MED) Syslog CDP (read only) Port security MSTP http/https over IPv4 STP Portfast Etherchannel Priority Port - Alarm Default static IP DHCP Snooping Trust ingress DSCP, COS DHCP Server SNMP v2/v3, SNMP Traps BPDU Guard ICMP RADIUS Client IGMP Port statistics IE1000 IE2000 ファイバーポート ✓ PoE対応 簡単設定：GUI CLI 二重化機能 セキュリティ QoS トラブルシューティング

6 Cisco IE1000 vs. IE2000 ハードウェア比較 ハードウェアサイズ IE1000 IE2000
4.5cm 8.0cm IE1000 IE2000 IE T1T-LM (5 ports) W3.81 x H12.7 x D11.5 IE TS-L (6 ports) 8.0W x 13.0H x D (cm) IE T2T-LM (8 ports) 4.5 W x 12.7 H x 11.5 D (cm) IE T-L (6 ports)

7 Cisco IE1000 シリーズ：型番情報 型番 製品概要 IE-1000-4T1T-LM
GUI Based L2 switch, 5×10/100ポート IE T2T-LM GUI based L2 switch, 8×10/100ポート IE P2S-LM GUI based L2 PoE switch, 2GE SFP ポート + 4 ×10/100ポート IE P2S-LM GUI based L2 PoE switch, 2 GE SFP, 8 ポート×10/100ポート

8 Cisco IE4010 シリーズの特徴 5 年間のハードウェア保証 次世代産業用アクセススイッチ 産業用としてのコンプライアンスに適合
過酷な環境に対応可能な耐久性に優れた構造 産業用としてのコンプライアンスに適合 既存のIE4000と同等機能をサポート PoE/PoE+に対応 最大200W（2電源）の給電容量によりPoE+として6ポート利用可能 Say hello to the Cisco Industrial Ethernet (IE) 4010 Series switches. They are today’s most flexible, scalable, and future-proof industrial Ethernet Access switches. These best-in-class switches provide all of the performance, manageability, and powerful security features of the IE2000, IE3000 Series, and IE-4000 including built-in Cisco intelligence, increased Power over Ethernet (PoE) support, and compliance with dozens of safety certifications and industry standards. Cisco’s unified communication solution—industrial Ethernet and Wi-Fi working together—can connect access points; provide voice, video, and data; and deliver rich business intelligence to connect plant floor operations with the enterprise using the Internet. The IE4010 Series has been specifically designed for industrial Ethernet applications, including factory automation, energy and process control, intelligent transportation systems (ITSs), city surveillance programs, mining, and oil & gas, as well as IT deployment where hardened products are required.

9 Cisco IE4010-16S12P 前面 Alarm Contacts 前面または背面でも設置可能
FOUR Alarm Inputs ONE Alarm Output 前面または背面でも設置可能 冗長化LEDにより前面・背面でも設置可 System, Alarm and Port Status LEDs 12×ギガビットイーサネットポート10/100/1000M Fixed Copper PoE+ 伝導冷却 ファンなし 高温環境でも動作可能 12 SFP×ギガビットイーサネットポート 100/1000M SFP 4 SFPギガビットイーサネットポート 100/1000M SFP フィールドでの電源交換が可能 High Voltage PS: 85–265 VAC VDC Low Voltage PS: VDC Swap Drive SD Flash 変電所でも利用可能な構造 Substation Compliant IEC and IEEE1613 全ポート IEEE 1588 v2/PTPサポート Power Profile c37.238, Default Profile

10 Cisco IE-4010-4S24P 前面 Alarm Contacts 前面または背面でも設置可能
FOUR Alarm Inputs ONE Alarm Output 前面または背面でも設置可能 冗長化LEDにより前面・背面でも設置可 System, Alarm and Port Status LEDs 24×ギガビットイーサネットポート10/100/1000M Fixed Copper PoE+ 伝導冷却 ファンなし 高温環境でも動作可能 4 SFPギガビットイーサネットポート 100/1000M SFP フィールドでの電源交換が可能 High Voltage PS: 85–265 VAC VDC Low Voltage PS: VDC Swap Drive SD Flash 変電所でも利用可能な構造 Substation Compliant IEC and IEEE1613 全ポート IEEE 1588 v2/PTPサポート Power Profile c37.238, Default Profile

11 Cisco IE4010 シリーズ サポート機能一覧 Common Platform Features Industrial Automation Features Utility Features License RTU package Static Routing Ethernet/IP (CIP)/PROFINET UNI and NNI interfaces Secure boot (FIPS140-2) RIP, EIGRP, BGP, OSPF, IS-IS IEEE 1588 PTP Default Profile IEEE 1588 PTP Power profile (P2P C37.238) Quack II and SUDI VTP Smartport Macro for Automation Utility Smartport Macro PoE/PoE+ with Port Priority VRF L2 Network Address Translation Parallel Redundancy Protocol (PRP) Auto Smartport (for phone or camera) CEF Alarm input/output GOOSE messaging Smart Install and Cisco EnergyWise® 2.8 DHCP Igmp querier/igmp snooping SCADA protocol classification MQC QoS and CPU QoS SXP Express Setup (use Web Interface) SCADA MODBUS TCP server Digital optical monitoring (DOM) Dying Gasp for loss of power Ethernet OAM, CFM, and E-LMI IP device tracking Embedded Event Manager (EEM) Link detection (BFD, GOLD, and OBFL) 802.1x Web Device Manager QinQ tunneling STP, RSTP, MSTP, PVST HSRP and VRRP Private VLAN LLDP, CDP Boot Fast (~ 2 minutes) Redundancy Ethernet Protocol (REP) Configurable Alarms (4 In, 1 Out) The IE4000, IE4010 and IE5000 support many SW features. Key features for the Industrial customers are listed above. The two main verticals with diverging features are Industrial Automation and Utility. Thus features for those verticals are called out specifically. For QoS the IE4010 is using MQC as opposed to MLS. MQC is preferred by the Utility customers, and QoS is used more heavily by utilities than the Industrial automation customers. The licensing for IE4010 is right to use (RTU) when upgrading from Lan Base to IP Services feature set. Ethernet OAM, CFM, E-LMI: PBR, QinQ tunnel (supported)

12 Cisco IE4010 シリーズ スケーラビリティ Switch Specifications LAN Base IP Services
VLANs supported 1005 4096 VLAN IDs Yes Spanning Tree Protocol instances 128 MAC addresses 16,000 IPv4 indirect routes 16 (static) 8000 IPv6 VRF instances - 26 Maximum EtherChannel groups 10 Egress queues 4 Ingress policers per port 63 IGMP groups 1000 SPAN monitors

13 Cisco IE スイッチシリーズ機能比較 - 
Cisco IE2000U Cisco IE3000 Cisco IE5000 Cisco IE4000/IE4010 LAN Base (Layer 2) Enhanced LAN Base (Layer 2) IP Lite (Layer 3) LAN Base (Layer 2) IP Services IP Services (Full Layer 3) Uplink Dual Redundant Rings -  Downlink Gigabit Ports IPv4 Indirect Routes 16 800 2000 1250 8000 QoS MQC or MLS MLS MQC PoE/PoE+ Ports 4 8 12 8/12 or 24 Number of SFP Uplinks  2 GE 2 FE 4 GE/10GE 4 GE Number of 10GE 4(10GE Model) Maximum MAC Addresses 7500 16,000 Maximum VLANs 255 1005 Cisco IE2000 Cisco IE4000/4010  フルサポート  一部機能制限あり - 未サポート Legend: This table has shows the Hardware differences in the IE Switching product portfolio. The IE4000/ IE4010 and IE5000 have better hardware scale and performance. Its Forwarding tables (L2 and L3) exceed the tables for the other products. They supports more PoE ports, and have more Gigabit/TenGigabit Ethernet Uplinks.

14 Cisco IE スイッチシリーズ機能比較 -  
Features Cisco® IE2000 Cisco IE2000U Cisco IE3000 Cisco IE5000 Cisco IE4000/IE4010 LAN Base (Layer 2) Enhanced LAN Base (Layer 2) IP Lite (Layer 3) LAN Base (Layer 2) IP Services IP Services (Full Layer 3) Layer 2 Features   IPv6  Security QoS Multicast Manageability Utility Enhancements - IE Enhancements Layer 3 Features Cisco IE2000  フルサポート 一部機能制限あり - 未サポート Legend: This table shows the high level overview of features and capabilities of the IE switching product portfolio. The IE4010 is designed to be deployed in all major Industrial categories, and has the feature support to make that happen. the IE4010 supports 2 feature set license levels. The LanBase Feature which is focused on Layer 2 switching and forwarding. And the IP Services feature set which contains Layer 3 IPv4 and IPv6 routing features. More details on the features contained in the IP Services feature are coming in later slides. IP Services feature set is a superset of the LanBase feature set. IE4010 is easily upgradeable from LanBase to IP Services feature set. The IE4010 does not require a license to be installed in order to upgrade. The upgrade process is based on the RTU model and is trust based.

15 IE 41010 シリーズ：型番情報 型番 製品概要 価格表掲載 Orderability FCS日 IE-4010-4S24P
4×1G SFPポート, 24×10/100/1000 GE PoE ポート、 LAN Base 2016/8予定 済 IE S12P 16x1G SFP and 12x10/100/1000 ポート 、LAN BASE 2016/9予定

16